Most of the time, businesses will spend a lot of money to purchase their forklifts. It is vital, therefore to take proper care of your equipment to protect your investment into the long run. It is a great idea to know the procedures which are undertaken during the maintenance and care of this piece of equipment.
One of the best ways to tell how good the engine is working is by starting the lift truck up and listening carefully to see how it works. Like for example, if there are any knocks or misses, the machinery is faulty and this should raise some issues. Moreover listen closely for any squealing noise which come from the belts as these noises would provide you with a wealth of information.
When carrying out maintenance, some of the main components you would need to pay attention to comprise the horn, safety warning devices, the lights, the gauges and the overhead guard. Any faulty parts or burnt out light bulbs should be replaced as soon as they are noticed. It is also imperative to check the wiring.
The battery compartment terminals should be cleaned when the above parts have been checked carefully. If the terminals are not clean, be sure to clean them properly. Each and every cell of the battery needs to be checked in order to make certain that the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the equipment and then change the filters. The fuel filters, hydraulic filter and the transmission filter must be replaced on a regular basis. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
Once the oil change has been completed and new filters have been fitted, visually inspect the drive axle from underneath the machine. Be sure to grease the axle if there is any grease fitting. Inspect the engine belts for any frays or cracks. If you find any, fix the issue accordingly. Afterwards, check each and every other component of the machine like the wheels. If any type of fault or problem is detected, be certain to deal with it immediately so as to make sure the equipment is working at its safest and optimum levels.